10/5/2.5/1Gbase-T Autosensing Ethernet Port; Sfp Port - HP FlexNetwork 5140 EI Series Installation Manual

10/5/2.5/1GBASE-T autosensing Ethernet port

The HPE 5140 24G PoE+ 2SFP+ 2XGT EI, HPE 5140 24G 2SFP+ 2XGT EI and HPE 5140 48G
PoE+ 2SFP+ 2XGT EI switches provide 10/5/2.5/1GBASE-T autosensing Ethernet ports.
Table 20 10/5/2.5/1GBASE-T autosensing Ethernet port specifications
Item
Connector type
Transmission rate, duplex mode, and
auto MDI/MDI-X
Max transmission distance
Transmission medium
Compatible standards

SFP port

Some HPE 5140 EI switch models provide SFP ports.
the SFP transceiver modules and cables.
Table 21 SFP port support for SFP transceiver modules and cables
Model
HPE 5140 24G 4SFP+ EI
HPE 5140 48G 4SFP+ EI
HPE 5140 48G PoE+ 4SFP+ EI
HPE 5140 24G PoE+ 2SFP+
2XGT EI
HPE 5140 48G PoE+ 2SFP+
2XGT EI
HPE 5140 24G 2SFP+ 2XGT EI
HPE 5140 8G 2SFP 2GT Combo
EI
Specification
RJ-45
•
10 Gbps, full duplex
•
5 Gbps, full duplex
•
2.5 Gbps, full duplex
•
1 Gbps, full duplex
•
MDI/MDI-X autosensing
•
10G mode:
100 m (328.08 ft) over Category-6 shielded twisted pair or

above twisted pair
60 m (196.85 ft) over Category-5e twisted pair or

Category-6 unshielded twisted pair
•
5G mode: 100 m (328.08 ft) over Category-5e or above
twisted pair
•
2.5G mode: 200 m (656.17 ft) over Category-5e or above
twisted pair
•
1G mode: 200 m (656.17 ft) over Category-5e or above
twisted pair
Category-6 (or above) twisted pair cable
•
IEEE 802.3ab
•
IEEE 802.3an
Table 21
SFP port support for SFP
transceiver modules and
cables
No SFP ports
•
SFP ports 9 and 10: GE
SFP transceiver module
and cables in Table 22
FE SFP transceiver
modules in Table 23
51
describes the SFP port support for
Restrictions
N/A
To use GE transceiver modules
with a maximum transmission
and
distance greater than or equal to 80
km (49.71 miles), make sure the
ambient temperature does not