Advertisement
KBefore using for the first
time
B efore you can use your new appliance, you must
B e f o r e u s i n g f o r t h e f i r s t t i m e
make some settings. You must also clean the cooking
compartment and accessories.
Before using for the first time
Before using the appliance for the first time, ask your
water supplier about the hardness of your tap water.
To ensure that the appliance can reliably remind you to
descale it when required, you must set your water
hardness range correctly.
Caution!
The appliance may become damaged due to the
■
use of unsuitable liquids.
Do not use distilled water, highly chlorinated tap
water (>40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
non-carbonated mineral water.
Malfunctions may occur when using filtered or
■
demineralised water.
The appliance may request that you top up the water
tank even though it may be full, or operation with
steam is cancelled after approx. two minutes.
If required, mix filtered or demineralised water with
the bottled non-carbonated mineral water with a ratio
of one to one.
Notes
If your water is very hard, we recommend that you
■
use softened water.
If you only use softened water, you can set the water
■
hardness range to "softened".
If you use mineral water, set the water hardness
■
range to "4 very hard".
If you use mineral water, you must only use non-
■
carbonated mineral water.
Water hardness range
0
1 (up to 1.3 mmol/l)
2 (1.3 - 2.5 mmol/l)
3 (2.5 - 3.8 mmol/l)
4 (above 3.8 mmol/l)
Initial use
After connecting the appliance to the power or following
a power cut, the settings for initial use are shown on the
display. It may take a few seconds for the instruction to
appear.
You can change these settings at any time in the
Note:
basic settings. ~ "Basic settings" on page 26
Setting
00 softened
01 soft
02 medium
03 hard
04 very hard
Before using for the first time
Setting the language
The language is the first setting displayed. "German" is
the preset language.
Turn the rotary selector to set the required language.
1.
Touch the next text field to confirm.
2.
The next setting appears.
Setting the clock
The clock starts at "12:00".
Touch the "Clock" text field.
1.
Set the clock using the rotary selector.
2.
Touch the next text field to confirm.
3.
The next setting appears.
Setting the water hardness
The default water hardness setting is "very hard".
Use the rotary selector to set the water hardness.
1.
Touch the "Complete the settings" text field to
2.
confirm.
A note appears in the display confirming that the initial
use has been completed.
Switch the appliance off using the ÿ On/Off button if
you do not need to use it.
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
Remove the accessories from the cooking
1.
compartment.
Remove any leftover packaging, such as polystyrene
2.
pellets, from the cooking compartment and remove
the adhesive tape that is in or on the appliance.
Before heating the appliance, wipe the smooth
3.
surfaces in the cooking compartment with a soft,
damp cloth.
Press the on/off button ÿ to switch on the
4.
appliance.
Fill the water tank. ~ "Filling the water tank"
5.
on page 19
Set the specified type of heating, temperature and
6.
steam injection, then start the appliance. ~ "Steam
baking – Steam-assisted cooking" on page 18
Settings
Type of heating
4D hot air < with added steam, setting 03
(high)
Temperature
Maximum
Cooking time
1 hour
en
15
Advertisement
