Skip Feed Printing - Ricoh TC-II Operating Instructions Manual

Skip Feed Printing

If the backs of prints are dirty, you
can increase the time between prints
using the {Skip Feed} key. By default,
when one sheet of paper is fed the
drum rotates once. However, you can
select the number of rotations of the
drum. This gives you the chance to re-
move prints one by one from the pa-
per delivery tray or insert one sheet of
paper between two prints. If you use
this function, you can also use paper
longer than 432mm, 17.0" in spite of
the maximum length limitations of
paper.
Note
❒ Two rotations per sheet of paper is
the default. You can change this
default setting with the user tools.
See "No. of Skip Feed" ⇒ P.23
"Skip Feed Printing".
❒ The maximum length of paper in
Skip Feed mode is 460mm, 18.1".
❒ When you use paper longer than
432mm, 17.0", completed prints
will not be delivered to the paper
delivery tray properly, so lower
the paper delivery end plate and
receive completed prints by hand.
A
Press the { { { { Skip Feed} } } } key.
B
If necessary, select the number of
rotations of the drum per sheet of
paper fed with the { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys.
SKIP FEED NO SETTING
INPUT THE NUMBER
Note
❒ You can also select the number
of rotations with the Number
keys.
❒ You can select from 2 to 9 rota-
tions.
❒ By default, the machine asks
you to confirm the number of
rotations. You can have this step
omitted by adjusting the user
tool settings. See "No. of Skip
Feed" ⇒ P.26 "User Tools".
C
q ] key.
q q
Press the [q
D
Press the { { { { Start} } } } key.
E
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Whole] or
[Drum2] key (⇒ P.20 "Adjusting
the Position of Printed Images").
F
Make your prints.
Skip Feed Printing
*
23
1