Standard Printing - Ricoh TC-II Operating Instructions Manual

Standard Printing

A
Set the Drum Unit.
Reference
⇒ P.7 "Setting the Drum Unit"
B
Make sure that the machine is
ready for printing.
C
Make sure that there are no previ-
ous settings remaining.
Note
❒ To clear any previous settings,
press the {Clear Modes}.
D
Set the paper
Reference
⇒ P.10 "Loading Paper"
E
Select the Paper type
Reference
⇒ P.17 "Printing onto Various
Kinds of Paper"
F
Set your desired settings.
G
Press the { { { { Proof} } } } Key.
Note
❒ If the Image position is not cor-
rect, adjust it by using {Whole}
or {Drum 2}. ⇒ P.20 "Adjusting
the Position of Printed Images".
❒ If the image density is slightly
dark or light, adjust the image
density, using {W W W W } {V V V V } Speed
keys. ⇒ P.22 "Changing the
Printing Speed".
H
Enter the number of prints re-
quired with the number keys.
Note
❒ The counter shows the number
of prints you set.
❒ To change the number entered,
press the {Clear/Stop} key and
enter the new number.
I
Press the { { { { Print} } } } key.
Standard Printing
1
15