Paper Supply Adjustment - Ricoh TC-II Operating Instructions Manual

Operation
C
Press the [q
Printing onto envelopes
1
A Place the envelopes in the pa-
per feed tray as shown in the il-
lustration.
*: Paper feed direction
Note
❒ When you use envelopes, the
Paper feed tray capacity is
about 150 sheets (85g/m
lb) or enough to load a stack
up to 105mm, 4.1" high.
B If your envelopes do not feed
in well, lift the paper feed tray
a little, and then lower it so that
it slants up slightly.
18
q q ] key. q

Paper Supply Adjustment

If paper misfeeds occur frequently,
you can adjust the paper feeding ratio
and paper separation ratio.
A
Press the { { { { Ppr. Supply Adj} } } } key.
GRENVE0E
FEED PRES. 0123456**
SEPAR PRES 0123456**
2
, 22
B
Press { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } { { { { | | | | } } } } { { { { { { { { } } } } or the
number keys to adjust the paper
feeding ratios and the paper sepa-
ration ratios.
C
Press { { { { #} } } } key.
If the machine does not feed
enough paper
A Change the paper feeding ratio
setting as follows.
Paper type
ZDZY030E
Standard
Thick
Special kinds of
Paper
*: Default
Paper feed pres-
sure ratio
5∼6(*3)
6(*5)
5∼6(*3)