Setting Up The Paper Delivery Table - Ricoh TC-II Operating Instructions Manual

Important
❒ Always make sure that you push
the lock lever for the side plates
down to lock the side plates in
position.
Note
❒ Make sure that the paper size
and direction in the panel dis-
play correspond with the actual
paper size and direction set on
the paper feed tray.
Setting Up the Paper Delivery
Table
A
Open the Paper Delivery Table.
B
Lift the paper delivery plates and ad-
just the side plates to the paper size.
Note
❒ The inside of the side plates should
align with the paper size scale.
C
Adjust the paper delivery end
plate to match the print paper
size.
Note
❒ The inside of the end plate
should align with the paper size
scale.
When you use thick paper (81.4
2
g/m to 209.3 g/m
55.6 lb)
A Adjust the side plates to match
the paper size scale on the
main frame side.
When you use standard paper
2
(52.3 g/m to 81.4 g/m
21.6 lb)
A Adjust the side plates to match
the paper size scale on the end
plate side.
Printing Preparations
2
, 21.6 lb to
2
, 13.9 lb to
11
1