Advertisement
Steps
1. Lower the display hinges on the display assembly.
2. Replace the six screws (M2.5x3) to secure the left and right display hinges to the display back cover.
Next steps
1. Install the
display
assembly.
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure in
Display panel
Removing the display panel (laptop)
Prerequisites
CAUTION:
The information in this section is intended for authorized service technicians only.
NOTE:
The display-panel removal procedure is applicable only for Latitude 5340 laptop and not for the 2-in-1 configuration.
NOTE:
The display panel and its support brackets are a single assembly and cannot be further disassembled once it is
removed from the display back cover. Do not remove the support brackets from the display panel.
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
display
assembly.
5. Remove the
display
bezel.
6. Remove the
display
hinges.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
95
Advertisement
