Advertisement
Display assembly
Removing the display assembly (laptop)
Prerequisites
CAUTION:
The information in this section is intended for authorized service technicians only.
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
WWAN 4G card
5. Remove the
WLAN
card.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
Steps
1. Remove the screw (M2x4) that secures the eDP bracket to the system board.
Before working inside your
or
WWAN 5G
card.
computer.
Removing and installing Field Replaceable Units (FRUs)
87
Advertisement
