Advertisement
About this task
The following image indicates the location of the camera and provides a visual representation of the installation procedure.
Steps
1. Insert the camera into the slot on the display back cover.
2. Connect the camera cable to the connector.
3. Adhere the adhesive tape above the camera connector.
Next steps
1. Install the
display
panel.
2. Install the
display
hinges.
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the battery.
6. Install the
base
cover.
7. Follow the procedure in
104
Removing and installing Field Replaceable Units (FRUs)
After working inside your
computer.
Advertisement
