Advertisement
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the palm-rest and provides a visual representation of the installation procedure.
Steps
Place the palm-rest assembly on a flat surface.
Next steps
NOTE:
The system board can be installed with the heat sink attached in order to simplify the procedure and preserve the
thermal bond between the system board and heat sink.
1. Install the
SIM card slot filler
2. Install the
display
assembly.
3. Install the speakers.
4. Install the
smart card reader
5. Install the
power button
6. Install the
system
board.
7. Install the
heat
sink.
8. Install the fan.
9. Install the
WLAN
card.
10. Install the
WWAN 4G card
11. Install the
M.2 2230 solid-state
12. Install the battery.
13. Install the
base
cover.
14. Install the
SIM card tray
15. Follow the procedure in
114
Removing and installing Field Replaceable Units (FRUs)
(for computers without nano-SIM card option).
(optional).
or
power button with optional fingerprint
or
WWAN 5G
card.
drive.
(for computers with nano-SIM card option).
After working inside your
reader.
computer.
Advertisement
