Advertisement
Steps
1. Remove the two screws (M2x2.5) that secure the solid-state drive thermal plate to the system board.
2. Lift the solid-state drive thermal plate from the solid-state drive..
NOTE:
If the thermal pad located on the thermal plate, gets detached, adhere it back to the solid-state drive thermal
plate.
3. Lift the solid-state drive holder and carefully release it from the hook to remove it.
4. Slide and remove the solid-state drive from the solid-state drive slot on the system board.
Installing the M.2 2230 solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the solid-state drive and provides a visual representation of the installation
procedure of M.2 2230 SSD.
58
Removing and installing Customer Replaceable Units (CRUs)
Advertisement
