Advertisement
Sensor board
Removing the sensor board (laptop)
Prerequisites
CAUTION:
The information in this section is intended for authorized service technicians only.
NOTE:
The sensor board removal procedure is applicable only for Latitude 5340 laptop and not for the 2-in-1 configuration.
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
display
assembly.
5. Remove the
display
bezel.
6. Remove the
display
panel.
About this task
The following images indicate the location of the sensor board and provide a visual representation of the removal procedure.
Steps
1. Open the latch and disconnect the display cable from connector on the sensor board.
2. Unroute the display cable from the display assembly.
3. Gently lift the sensor board away from the display assembly.
Installing the sensor board (laptop)
About this task
CAUTION:
The information in this section is intended for authorized service technicians only.
Before working inside your
computer.
Removing and installing Field Replaceable Units (FRUs)
107
Advertisement
