Advertisement
4. Replace the two screws (M2x2.5) that secure the display panel to the display assembly.
5. Replace the six screws (M2.5x3) that secure the right and left display hinges to the display.
Next steps
1. Install the
display
hinges.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the battery.
5. Install the
base
cover.
6. Follow the procedure in
eDP cable
Removing the eDP cable (laptop)
Prerequisites
CAUTION:
The information in this section is intended for authorized service technicians only.
NOTE:
The eDP cable removal procedure is applicable only for Latitude 5340 laptop and not for the 2-in-1 configuration.
1. Follow the procedure in
100
Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
computer.
computer.
Advertisement
