Advertisement
Steps
1. Adhere the conductive tape to secure the camera cable in place.
2. Connect the camera cable from the connector on the camera module and close the latch.
3. Connect the eDP cable to the display back cover.
Next steps
1. Install the
display
panel.
2. Install the
display
hinges.
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the battery.
6. Install the
base
cover.
7. Follow the procedure in
Camera
Removing the camera (laptop)
Prerequisites
CAUTION:
The information in this section is intended for authorized service technicians only.
NOTE:
The camera removal procedure is applicable only for Latitude 5340 laptop and not for the 2-in-1 configuration.
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
display
assembly.
5. Remove the
display
bezel.
102
Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
computer.
computer.
Advertisement
