Advertisement
Steps
1. Align and place the power button with the fingerprint reader and cable on the palm-rest assembly.
2. Replace the screw (M2x2) to secure the power button with optional fingerprint reader to the palm-rest assembly.
Next steps
1. Install the
system
board.
2. Install the
heat
sink.
3. Install the fan.
4. Install the
WLAN
card.
5. Install the
WWAN 4G card
6. Install the
M.2 2230 solid-state
7. Install the battery.
8. Install the
base
cover.
9. Install the
SIM card tray
10. Follow the procedure in
Keyboard assembly
Removing the keyboard assembly
Prerequisites
CAUTION:
The information in this section is intended for authorized service technicians only.
1. Follow the procedure in
2. Remove the
SIM card tray
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
M.2 2230 solid-state
6. Remove the
WWAN 4G card
7. Remove the
WLAN
card.
82
Removing and installing Field Replaceable Units (FRUs)
or
WWAN 5G
card.
drive.
(for computers with nano-SIM card option).
After working inside your
Before working inside your
(for computers with nano-SIM card option).
drive.
or
WWAN 5G
card.
computer.
computer.
Advertisement
