Paper Input - Ricoh AP610N Maintenance Manual

Paper and Other Media
B
Press the {U} or {T} key to display [ Paper Input ], and then press the {#
Enter} key.
Menu:

Paper Input

The paper selection menu appears.
C
Press the {U} or {T} key to display [Tray Paper Size], and then press the
{# Enter} key.
The paper tray selection menu appears.
D
Press the {U} or {T} key to display the target paper tray, and then press
the {# Enter} key.
Tray Paper Size:
Tray 2
The paper size selection menu appears.
E
Press the {U} or {T} key to display the loaded paper size, and then
press the {# Enter} key.
Tray 2:
8 1/2 x 13
After about two seconds, the display returns to the menu.
F
Press the {Online} key.
The initial screen appears.
This completes the setting change.
Specifying custom size paper for Tray 1 and the optional paper feed unit
❒ When printing on custom size paper, specify the paper size using the control
panel or printer driver.
❒ The custom size paper selected using the printer driver overrides that select-
ed using the control panel. Do not make settings using the control panel if you
have already made settings using the printer driver. However, when printing
with a printer driver other than the RPCS printer driver, you must configure the
settings using control panel.
❒ The following is the range of paper sizes that can be loaded in each type of
the paper trays:
• Tray 1: 5.5 - 8.5 inches in width and 5.5 - 14.02 inches in length.
23