Ricoh AP610N Maintenance Manual page 81

Troubleshooting
Messages/Second
messages
Load Paper
or Form Feed
/ Paper Size:
Paper Type:
Load Paper: Tray #
or Form Feed
/ Paper Size:
Paper Type:
Menu Protected
Cannot change
No Files exist
No Log exists
Offline
P=XX I=XXXXXXXX
Power Off On
/ If Error Reoccur
Call Service
Paper Invalid
for Duplex:Tray #
/ Change Setting
or Form Feed
Please wait...
Description
The paper type and size set-
tings for this tray do not match
the size and type of paper actu-
ally loaded.
There is no paper left in this
tray.
#: tray number
The menu is protected and the
settings cannot be changed.
There are no files available for
the sample print job or the
locked print job.
The user has selected to print
the error log in the List/Test
Print mode, however no errors
have been detected and so a
log has not been created.
The printer is offline and cannot
print data.
A controller error. The SC num-
ber indicates the problem.
A paper setting for the selected
tray is not supported for duplex
printing.
#: tray number
WEP settings are being
changed and updated in this
status message. The printer
device keys are unoperational
during this period.
The user is urged to wait while
emulation is switching.
Solution
Load paper into the tray indicated,
then press {# Enter} key to resume
printing. Or press {Form Feed} key and
select the tray that holds a different
type of paper. To cancel printing,
press {Job Reset} key. Then press {#
Enter} key.
Load paper into the tray indicated.
Wait for two seconds until the previ-
ous display appears.
Wait for two seconds until the previ-
ous display appears.
Press {Online} key.
Turn the power off, and then on. If the
message appears again, call your
sales or service representative.
Change the paper setting with the
control panel. Or press {Form Feed}
key several times until a tray with sup-
ported paper settings appears on the
panel display.
Or press {Job Reset} key to cancel the
print job.
Wait a while.
Wait a while.
81