Ricoh AP610N Maintenance Manual page 29

Paper and Other Media
❒ 45 kg paper or paper of A4K or 8
erly unless it is cut at right angles.
C
To set the paper size and feed direction, Press the {Menu} key.
The [Menu] screen appears on the display.
D
Press the {U} or {T} key to display [Paper Input], and then press the {#
Enter} key.
Menu:
Paper Input
The paper selection menu appears.
E
Check [Bypass Size] appears, and then press the {# Enter} key.
The paper size selection menu appears.
F
Press the {U} or {T} key to display the size and orientation of the paper
in the bypass tray.
Bypass Size:
*8 1/2 x 11
After about two seconds, the display returns to the menu.
G
Press the {Online} key.
The initial screen appears.
❒ To load thick paper, OHP transparencies, or envelopes, make settings for
thick paper or OHP transparencies using the control panel and printer driv-
er.
❒ The number of pages that can be loaded in the bypass tray differs depend-
ing on paper type. Make sure paper is not stacked above the paper guides
inside the bypass tray.
× 11K or longer may not feed in prop-
1
/
2
29