Ricoh AP610N Maintenance Manual page 31

Paper and Other Media
D
Press the {U} or {T} key to display [Custom Size], and then press the {#
Enter} key.
E
Press the {U} or {T} key to set the horizontal value, and then press the
{# Enter} key.
Custom Size:
Horiz.
By pressing the key, the value increases or decreases by 0.01 inch. By press-
ing and holding the key, the value varies by 0.1 inch or 1 inch.
F
Press the {U} or {T} key to set the vertical value, and then press the {#
Enter} key.
Custom Size:
Vert.
After about two seconds, the display returns to the menu.
G
Press the {Online} key.
The initial screen appears.
For details about the printer driver, see the printer driver Help.
Specifying a paper type for the Bypass Tray
By selecting the paper type you want to load, the printer performs better. You can
select from the following paper types:
• Plain Paper, Recycled Paper, Special Paper, Color Paper, Letterhead, Pre-
printed, Transparency, Thick Paper.
❒ When you load Thick Paper or transparencies in the Bypass Tray, always
specify the type of paper. Duplex printing is not possible on paper in a tray for
which Thick Paper or Transparency has been set.
❒ The paper type selected using the printer driver overrides that selected using
the control panel.
8.50 "
11.00 "
31