Ricoh AP610N Maintenance Manual page 82

Troubleshooting
Messages/Second
messages
Print Overrun
Printing...
Processing...
RC Gate
connection error
Ready
Remove Misfeed
Duplex Unit
/ Open Duplex
Unit Cover
Remove Misfeed
Internal Path
/ Open
Front Cover
Remove Misfeed
Paper Exit Cover
/ Open Paper
Exit Cover
Remove Misfeed
Paper Tray
/ Pull out Tray
Remove Paper
Standard Tray
Replace
Maintenance Kit
Description
A Print overrun occurred on a
file being printed. Only a part of
the data on the page will be
printed, and the print job is sus-
pended, or the current print job
has been canceled.
Print data is being processed.
Cannot communicate with RC
Gate.
The default ready message.
The printer is ready to use.
There is misfeed in the duplex
unit.
There is a misfeed in the print-
er.
There is a misfeed in the paper
exit cover.
There is a misfeed in the print-
er.
The standard tray is full, and
the print job is suspended.
It is time to replace the mainte-
nance kit (friction pad, paper
feed roller, transfer roller and
fusing Unit).
Solution
To print the image correctly, add
memory to the printer or reduce the
Resolution of the image.
Wait a while.
Wait a while.
Check the device or the RC Gate net-
work connection.
No action required.
Remove the misfed paper.
See p.110 "When "Remove Misfeed
Duplex Unit" Appears".
Remove the misfed paper.
See p.98 "When "Remove Misfeed In-
ternal Path" Appears".
Remove the misfed paper.
See p.101 "When "Remove Misfeed
Paper Exit Cover" Appears".
Remove the misfed paper.
See p.96 "When "Remove Misfeed
Paper Tray" Appears".
Remove paper from the standard tray,
and the print job will be resumed auto-
matically.
Replace the new maintenance kit.
See p.45 "Replacing the Maintenance
Kit".
82