Adjusting The Supports And Positioning The Tonometer - Icare HOME2 Quick Manual

5

Adjusting the supports and positioning the tonometer

Before the measurement,
adjust the forehead and
cheek supports to the
correct length. Start
with the supports at the
maximum length.
Shorten the supports
only two clicks at a
time to prevent the
tonometer from getting
too close to your eye.
WARNING!
Only the probe should touch the eye. Do not touch your eye with any
other parts of the tonometer. Do not poke your eye with the tonometer.
START
Place the tonometer against your face and
look into the probe base. The probe points
perpendicularly to the center of your eye
when the blue and green rings in the probe
base are symmetrical.
10