Table of Contents
Advertisement
on how to register your tonometer. You will get your iCare credentials
during the registration process.
If you need help, contact your healthcare professional, tonometer
distributor or iCare.
NOTE! iCare CLINIC professional user (doctor, trainer or administrator)
credentials cannot be used for logging into the PATIENT2 app. The
PATIENT2 app is used only for reviewing an individual patient's results,
using an individual patient's CLINIC credentials. The app is also used for
uploading measurement data from iCare HOME (s) or iCare HOME2(s) to
the iCare CLINIC, in which case logging into PATIENT2 is not needed.
6. Install and start using the app
1.
Open Google Play on your mobile device.
2.
Search for iCare PATIENT2.
3.
Follow the installation instructions shown on the screen.
To start using the app, tap START USING THE APP. Select your area of
residence and the correct option for where your eye pressure data will be
stored. Read the terms of service and agree to the terms of use and to
the processing of your personal data, by checking the respective boxes.
Choose your tonometer (iCare HOME2 or iCare HOME).
7. Connect to the tonometer using
Bluetooth®
7.1. Switch on the tonometer
NOTE! The Bluetooth connection is compatible with the iCare HOME2
tonometer only.
Bluetooth may be already activated on your tonometer. You can check
your tonometer's Bluetooth status and turn Bluetooth on, if needed, by
following these instructions.
1.
Press
until you hear a beep to switch on the tonometer.
7
Advertisement
Table of Contents
