802.11B Interface Unit Type A - Ricoh Aficio CL5000 Setup Manual

802.11b Interface Unit Type A

R CAUTION:
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
Important
❒ Be sure to touch a metal object be-
fore touching the 802.11b Interface
Unit to discharge static electricity.
Even a small amount of static elec-
tricity can damage the unit.
❒ 1394 Interface Unit, 802.11b Inter-
face Unit and USB2.0 Interface
Board cannot be installed in the
printer at the same time.
A A A A
Check the contents.
❖ ❖ ❖ ❖ 802.11b Interface Unit
❖ ❖ ❖ ❖ Card
❖ ❖ ❖ ❖ Antenna
B B B B
Turn off the power switch, and
then unplug the power cable and
the interface cable.
C C C C
Remove the dustproof filter cover
on the back of the printer. First,
lift the cover by holding the bot-
tom of it (A A A A ), and then remove it
(B B B B ).
ZHBP410E
ZHBP420E
802.11b Interface Unit Type A
ZHBP430E
ZESHK212J
1
41