Mail Bin Type 5000 (4-Bin Mailbox) - Ricoh Aficio CL5000 Setup Manual

Options

Mail Bin Type 5000 (4-bin Mailbox)

Preparation
1
Install the Interchange Unit before
installing the 4-bin Mailbox. The 4-
bin Mailbox cannot be installed
without the Interchange Unit in-
stalled in advance. ⇒ p.11 "Inter-
change Unit Type 5000"
R CAUTION:
• The inside of the machine be-
comes very hot. Do not touch the
parts with a label indicating "v"
(means hot surface). Touching
"v" (means hot surface) could
result in a burn.
• When installing the 4-bin Mail-
box, be sure to hold the sides of
them. If you hold the bottom,
your hands may get caught and
injured.
• When moving the 4-bin Mailbox,
hold the center of both sides,
and then lift it slowly. Lifting it
carelessly or dropping it may
cause an injury.
Important
❒ Since either the Finisher or the 4-
bin Mailbox can be installed to the
printer, the 4-bin Mailbox cannot
be installed if the Finisher is al-
ready installed to the printer.
A A A A
Turn off the power switch, and
then unplug the power cable.
B B B B
Remove the adhesive tapes.
24
C C C C
Check the contents.
❖ ❖ ❖ ❖ Screw
❖ ❖ ❖ ❖ Two Screws
❖ ❖ ❖ ❖ Four Output Trays
❖ ❖ ❖ ❖ Labels