Duplex Unit Type 5000 - Ricoh Aficio CL5000 Setup Manual

Duplex Unit Type 5000

Preparation
Install the Interchange Unit before
installing the Duplex Unit. The
Duplex Unit cannot be installed
without the Interchange Unit in-
stalled in advance. ⇒ p.11 "Inter-
change Unit Type 5000".
R CAUTION:
• The inside of the machine be-
comes very hot. Do not touch the
parts with a label indicating "v"
(means hot surface). Touching
"v" (means hot surface) could
result in a burn.
• When installing the Duplex Unit,
do not release the unit until it is
fastened firmly in place. It may
cause the unit to fall and result in
an injury.
A A A A
Turn off the power switch, and
then unplug the power cable from
the wall outlet.
B B B B
Remove the adhesive tapes.
Note
❒ Do not remove the tape that is
tying the cable. It will be re-
moved in step
C C C C
Check the contents.
❖ ❖ ❖ ❖ Metal Fitting (A)
M
.
Duplex Unit Type 5000
❖ ❖ ❖ ❖ Metal Fitting (B)
❖ ❖ ❖ ❖ Metal Fitting (C)
❖ ❖ ❖ ❖ Two Stoppers
❖ ❖ ❖ ❖ Three Screws
❖ ❖ ❖ ❖ Wrench
Note
❒ Confirm the difference in shape
for metal fittings (A), (B) and
(C).
1
15