Ricoh Aficio CL5000 Setup Manual page 21

B Attach the metal fitting (B) to
the (B) shown in the illustra-
D D D D
tion of step
C Attach the metal fitting (C) to
the (C) shown in the illustra-
D D D D
tion of step
Note
❒ Store the wrench in a secure
place so that you will not lose
it.
F F F F
Open the Bypass Tray.
.
ZESP058J
.
ZESP261J
ZESP177J
Note
❒ Remove paper on the Bypass
Tray to prevent them from fall-
ing.
G G G G
From the right side of the printer,
hold the Duplex Unit with both
hands, and then insert its projec-
tions to the (B) and (C) on the
printer over the Bypass Tray as
shown in the illustration.
H H H H
Align the projections and dents
on the Duplex Unit and the print-
er, and then slide the Duplex Unit
to the right until it clicks into
place.
Important
❒ Be sure that the projections and
the dents are connected proper-
ly.
Duplex Unit Type 5000
ZESP169J
ZESP170J
1
17