ION SYST0101CW Installation Instructions Manual page 6

outdoor units or heat pumps, an Ion Communicating Relay Module or "CRM" (P/N
SYST0101RM) may be required to provide additional control outputs.
All system components are controlled through the wall mounted Ion System Control, which
replaces the conventional thermostat and provides the homeowner with a single wall control for
all features of the system.
3. Quick Start
NOTE: See Installation Section for installation instructions.
3.1. Set Time and Date
The time and date can either be set manually or can be synchronized with the web server. From
the main screen, touch MENU, on the bottom of the control. The TIME/DATE icon will bring
up the time and date menu.
A14215
3.1.1. Manually Adjust Time and Date
• To set the HOUR, MINUTE, MONTH, DAY, or YEAR touch the feature you wish to
change.
• Use the Up (▲) and Down (▼) buttons to make the appropriate changes.
• When you have completed all of the settings touch SAVE.
3.1.2. Setup Time Zone
The time zone can be selected by selecting the set time zone from the menu. Then select the
time zone for the location. Time zones for both US and Canada are included.
3.1.3. Enable Time Synchronization
After setting up the time zone, the time synchronization can then be done, after connection to
the Internet server. Both setting the time zone and enabling time synchronization must be done
in order to enable time synchronization.
6