ION SYST0101CW Installation Instructions Manual page 42

Hide thumbs Also See for SYST0101CW:

Information Section. To return to the previous screen, touch BACK. To exit, touch DONE. See

Dealer Contact Information Section.

6.5.11. Energy Tracking

NOTE: Energy Tracking is only available for applicable equipment. See The Product Data for

the equipment in question to see if Energy Tracking is available for that device. Both indoor and

outdoor units must have energy tracking capability for this feature to function fully. See System

Product Data for compatible units and more information.

NOTE:

This menu item allows the installer to view the energy usage of each piece of equipment

connected to the system. To return to the previous screen, touch BACK. To exit the Service

menus, touch DONE.

A14231

6.6. Refrigerant Charging: SmartSense Systems

This feature is only available on specific units. See the Ion System Control Product Data for

compatible units and more information. For multi-stage heat pumps and AC units, a refrigerant

charging menu is available to aid in the proper charging of the system. Enter the menu from the

service screens by touching REFRIGERANT CHARGING.The option for HTG CHECK

CHARGE is only available for heat pump units, and not available in AC units.

NOTE: See the outdoor equipment Installation Instructions for information on what conditions

CHARGING COOLING and HTG CHECK CHARGE are available.

6.6.1. Charging

See the Ion System Control Product Data for compatible units and more information. Within the

CHARGING COOLING or HTG CHECK screens, the installer will have the ability to enter

the LINESET length and the VAPOR LINE diameter. After the selections are made, touch

NEXT.

• Lineset: Selectable from 5 to 200 feet

NOTE: For multi-stage product, 100 feet is the maximum allowed refrigerant line length.

• Vapor line: Selectable with various diameters by using the up and down buttons