ION SYST0101CW Installation Instructions Manual page 48

no security it will show as on the left, but a secured network will prompt for the Wi-Fi
security key.
• If a Wi-Fi network security key is shown as on the right hand picture above then select the
white bar and enter the security key, then select NEXT.
• Touch in the security key area, and the keyboard will appear.
– Use the on screen keyboard to enter the Wi-Fi network security key, then touch NEXT.
• The control will inform you if the connection is successful. If so, touch DONE.
– If the connection is unsuccessful, verify that the proper information has been entered
before you touch RETRY. The control will go through the process again.
• After the control has connected to the network, go to www.IonComfort.com to register the
unit or you can use the Ion® Home mobile app to begin remote access. This requires the
MAC address and serial number of the Ion System Control. If using the Ion® Home mobile
app you can just scan the QR Code on the wall control and it will fill in the control
information. To find the serial number and MAC address on the Ion System Control, click on
Menu, Down Arrow, Wireless and View Registration Info. This screen will provide the
information needed on the My Ion website during registration or you can select the QR code
for use with the Ion® Home mobile app.
48
A13237
A13238