ION SYST0101CW Installation Instructions Manual page 40

A12199
6.5.5. Heat Pump Status
The heat pump status screen displays relevant information about the heat pump operation. To
return to the previous screen, touch BACK. To exit the Service menus, touch DONE.
A12200I
6.5.6. Zoning Status
NOTE: This feature is only available with specific ICP communicating indoor units. See the
Ion System Control Product Data for compatible units and compatible units and more
information.
The zoning status screen displays relevant information about the zoning operation. To return to
the previous screen, touch BACK. To exit the Service menus, touch DONE.
6.5.7. Last 10 System Events
This screen will show the last 10 events that occurred throughout the system. Each entry has the
time and date incident recorded. These events are stored in the memory of the control and are
resettable in the THERMOSTAT SETUP screen under the RESET FACTORY DEFAULT
selection. Each entry shows the equipment that generated the event. To return to the previous
screen, touch BACK. To exit the Service menus, touch DONE.
40