Download Print this page

ION SYST0101CW Installation Instructions Manual page 21

Hide thumbs Also See for SYST0101CW:

Offsets Section. When the correct offsets are made, touch SAVE. If the system is non-zoned, the

indoor temperature offset is found on this screen. If the system is zoned, the indoor temperature

offset is found in the Zoning, Offsets screen.

• Outdoor temperature: Adjustable from -5 to 5°F (-3 to 3°C). Default = 0°F

• Indoor temperature: Adjustable from -5 to 5°F (-3 to 3°C). Default = 0°F

• Humidity: Adjustable from -10 – 10%. Default = 0%

NOTE: For single-zone systems, the indoor temperature offset is on this screen. For zoning

systems, there is a separate zone indoor temperature offset screen in the zoning menu.

Single-zone Systems

6.3.1.4. Reset Factory Defaults

This option allows the installer to reset certain factory parameters. After the selections are

made, touch SAVE.

• Program Schedule: Reset back to pre-programmed time and temperature.

• User Settings: Reset user settings back to pre-programmed values.

• Install Settings: Reset installation settings back to pre-programmed values.

• Last 10 Events: Reset the last 10 system events under the Service menu.

6.3.1.5. Scheduling On/Off

This option lets the installer allow comfort schedule programming features. After the selection

is made, touch SAVE.

• Scheduling: On or Off. Default = On

Zoning Systems

A190275

A190397