ION SYST0101CW Installation Instructions Manual page 41

6.5.8. Run/Fault History
This information is stored in the equipment circuit boards (if communicating) and displayed on
the control. The indoor unit and outdoor unit (if communicating) have the following histories.
To return to the previous screen, touch BACK. To exit the Service menus, touch DONE.
• Resettable Faults: Fault counters for each piece of equipment that can be reset.
• Cycle Counters: Number of heat/cool/power cycles the unit has performed.
• Run Times: Lifetime hours of operation in heating, cooling, and how long the unit has been
powered.
6.5.9. Model/Serial Numbers
This menu item allows the installer to view the model number, serial number (if available), and
control software version (if available) of all communicating pieces of equipment in the system,
including the wall control. This information resides in the original equipment circuit board(s)
from the factory. If an equipment circuit board has been replaced, the model and serial number
will no longer be displayed. To return to the previous screen, touch BACK. To exit the Service
menus, touch DONE.
6.5.10. Service Phone Number
This menu item allows the installer to view the name and phone number that the homeowner
can call for future service of the system. This name and phone number will appear to the
homeowner whenever a service reminder pop-up message is displayed (i.e. Change Filter, etc.).
The contact number can be changed under the dealer system menu. See Dealer Contact
41
A12151
A14230