Changing The Line Port - Ricoh Aficio 3045 Facsimile Reference Manual

Other Transmission Features

Changing the Line Port

The optional extra G3 interface unit is required.
When the extra G3 interface unit is in-
stalled, you can connect to a maxi-
mum of three ports.
Note
❒ When you install the extra G3 in-
terface unit, you can specify the
line port home position from "Gen.
Settings/ Adjust". See p.145 "Gen-
eral Settings/Adjustment".
4
❒ When sending a fax, you can select
the line port if dialing with the
number keys or Chain Dial.
❖ G3
G3 is selected after power up or
when the machine is reset. If you
install the extra G3 interface unit,
you can select "G3-1", "G3-2",
"G3-3", or "G3 Auto"depending
on the number of the installed unit.
60
❖ Multi-port
When the extra G3 interface unit is
installed, communications can
take place simultaneously through
three lines at once.
The following list shows protocol
combinations available for each
line type.
Option Available
line types
Without PSTN
option
Extra G3 PSTN+
interface PSTN
unit
Extra G3 PSTN +
interface PSTN +
unit + PSTN
Extra G3
interface
unit
Note
❒ A maximum of three simulta-
neous communications are pos-
sible. You cannot perform three
Immediate Transmissions si-
multaneously.
❒ If three communications are in
progress, the display shows the
first communication that was
initiated
Available
protocol
combinations
G3
G3+G3
G3 + G3 + G3