Maintenance And Inspection Intervals - J. D. NEUHAUS PROFI 6 TI Customer's Operating And Assembly Instructions

M
AINTENANCE

8.3. Maintenance and inspection intervals

The specified inspection intervals are valid for use in accordance with the classification. The service life is
approx. 10 years if the device is used in accordance with its classification.
If your product is used more intensively, the intervals are to be shortened accordingly. All operating hours are
translated into full load hours. The theoretical operating time and the interval hours are indicated in full load
hours.
Maintenance and
inspection measures
Check control device
Check direction of movement
Check brake function without load
Visually inspect the buffer of
lifting and lowering limiters
Check the function of the
EMERGENCY STOP
Visually inspect the chain
Check chain
Lubricating the chain
Check lifting limiter
Check lowering limiter
Check brake function with nominal load
Check hook, shackle, eyelets
Check silencer
Check all the bolted
and pin connections
Check the connections
and hose lines for damage
Page 44 of 62
Interval Section / comment
Daily
Daily
Daily
Daily
Daily
Weekly
Every 3 months
As required
Annually
Annually
Annually
Annually
Annually
Annually For tightening torques,
Annually Replace damaged parts if necessary
Doc.-No.: VA057988-10-OM-EN-0821-62-1
8.7, Page 50
8.8, Page 50
8.9, Page 50
8.11, Page 51
8.10, Page 51
8.14, Page 52
8.14, Page 52
8.6.2, Page 47
8.12, Page 51
8.13, Page 52
8.9, Page 50
8.17, Page 54
8.18, Page 55
see spare parts list.