Product Information; Proper Use; Improper Use - J. D. NEUHAUS PROFI 6 TI Customer's Operating And Assembly Instructions

3. Product information

3.1. Proper use

Your product PROFI 6 TI is designed for lifting and
lowering loads in the range of the rated load ca-
pacity with a vertically arranged chain.
Your product is also suitable for pulling loads hori-
zontally.
In combination with a trolley, your hoist is also suit-
able for overhead horizontal movement of loads.
Please observe the following national legal provi-
sions. Any other or exceeding use is considered
improper. J.D. Neuhaus GmbH & Co. KG assumes
no liability for damage resulting from this improper
use. The risk is borne solely by the user.
Proper use also includes the observance of the
operating instructions and compliance with the
inspection and maintenance conditions.
Doc.-No.: VA057988-10-OM-EN-0821-62-1
P
RODUCT INFORMATION

3.2. Improper use

Among others, the following are considered im-
proper uses
Changing load capacities with the load posi-
tion: Your product is not equipped with a load
capacity display, which is why it may only be
used in such cases where the load capacity
does not change with the load position
Exceeding the load capacity
Breaking free or towing loads
Load the hook at the tip
Catching falling loads
Transporting people
Jog controls
For ongoing motion, switch in the opposite
direction
Starting lifting and lowering limiter under nor-
mal operating conditions
In the upper or lower limit position of the load
hook, keep the chain taught in the area of the
central part
Transport of changing masses
Oblique pulling
Page 11 of 62