Ce -Marking; Spare Parts - J. D. NEUHAUS PROFI 6 TI Customer's Operating And Assembly Instructions

Hide thumbs Also See for PROFI 6 TI:
Table of Contents

Advertisement

P
RODUCT INFORMATION
Temperature limits for explosion-hazardous
dusts In areas that are potentially explosive
due to combustible dusts, the surface temperature
must not exceed two-thirds of the ignition temper-
ature in C of the dust/air mixture. The tempera-
tures of surfaces on which hazardous deposits of
combustible dusts can be formed must not exceed
the glow temperature of the relevant dust that is
reduced by 75K. Greater safety margins are re-
quired if the thickness of the dust layer exceeds 5
mm.
The corresponding surface temperatures can
be derived from the lowest values for glow and
ignition temperatures of dusts specified in the
HVBG/BIA report 12/97 "Combustion and explo-
sion characteristics of dusts".
Examples:
Synthetic rubber, soot-containing:
Glow temperature 220 C - 75 C = 145 C max.
permissible surface temperature
Stearic acid:
Ignition temperature 190 C x 2/3 =126 C max.
permissible surface temperature
For further information:
6
Guideline 2014/34/EU of the European Parliament and the
Council
7
DIN EN 1127-1: Explosive atmospheres - Explosion preven-
tion and protection - Part 1: Basic concepts and methodol-
ogy, 1997-10
8
EN ISO 80079-36: Explosive atmospheres - Part 36: Non-
electrical equipment for explosive atmospheres - Basic
method and requirements
9
EN ISO 80079-37: Explosive atmospheres - Part 37: Non-
electrical equipment for explosive atmospheres - Non-
electrical type of protection constructional safety "c", control
of ignition sources "b", liquid immersion "k"
Page 26 of 62
6789

3.11. CE -marking

Your product PROFI 6 TI is marked with
delivered design, your product meets all relevant
provisions of the EC directive for which you have
received a declaration of conformity.
For more information:
EC declaration of conformity

3.12. Spare parts

Only use original JDN spare parts. J.D. Neuhaus
GmbH & Co. KG accepts no liability for the use of
non-original components and / or modifications by
unauthorised persons.
Doc.-No.: VA057988-10-OM-EN-0821-62-1
CE
. In the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P706448

Table of Contents