Decommissioning; Disassembly; Disposal - J. D. NEUHAUS PROFI 6 TI Customer's Operating And Assembly Instructions

7. Decommissioning

7.1. Disassembly

CAUTION
Danger from faulty disassembly
Improper disassembly can lead to injuries.
Your product PROFI 6 TI may only be disman-
tled by qualified personnel.
1. Depressurise the power supply.
2. Provide a suitable working platform.
3. Remove the hose.
4. Protect the connection pieces from the
ingress of dirt.
5. Release the control hoses. Do not kink the
control hoses!
6. Mark the connections.
7. Loosen the strain relief or hose support and
remove the control device.
8. Carefully hang up your product PROFI 6 TI
and transport away
Doc.-No.: VA057988-10-OM-EN-0821-62-1
D
ECOMMISSIONING

7.2. Disposal

Your product PROFI 6 TI contains a series of ma-
terials that you may have to dispose of or have re-
cycled after the end of their useful lives according
to statutory provisions.
Please note the following list of materials used:
Ferrous materials: Steel, spheroidal graphite
iron
Non-ferrous metals: Bronze, aluminium, brass
Plastics: Polyurethane, polyoxymethylene,
polyvinyl chloride, glass-fibre reinforced
polyamide, rubber, polypropylene, phenolic
resin, epoxy resin, thermosetting moulding
material (asbestos-free brake pads), synthetic
rubber
Page 39 of 62