Attaching The Load - J. D. NEUHAUS PROFI 6 TI Customer's Operating And Assembly Instructions

O
PERATION
Have detached screw connections from repair
attached.
When lifting loads in non-visible areas, special
safety precautions must be taken.
Uncontrolled external force impacts (such as
from hydraulic cylinder, falling loads) are not
allowed.
Never allow persons to stay under a sus-
pended load.
Never try to correct a fault with a suspended
load.
Ensure that there is no threat to the operator
at the workplace due to slings or the load.
Choose a safe site of operation.
Do not make any changes to the product.
Only use original JDN spare parts. J.D.
Neuhaus GmbH & Co. KG accepts no liabil-
ity for the use of non-original components and
/ or modifications by unauthorised persons.
Contractor's operating instructions For par-
ticularly difficult cases of application with your
product, the contractor must create operating in-
structions in an intelligible form in the operator's
language while taking this user manual into con-
sideration.
These instructions shall regulate measures for
safe operation according to the operational con-
ditions.
In addition, all information must be strictly ob-
served that is listed in the sections of Proper use,
Improper use und Operating conditions aufgef ¨ uhrt
sind.
Page 36 of 62

6.2. Attaching the load

WARNING
Danger to life from being struck
Improper attaching the load can lead to the load
crashing down.
Only use slinging chains or attachment chains
(sling gear) suitable for the load.
Loads may not be slung by looping with the lift
chain / load chain.
In Germany, the professional association rule "Op-
eration of load lifting equipment in hoist operation"
is to be followed (BGR 258).
In other countries, corresponding national regula-
tions are to be observed.
Figure 11: Safely attaching loads
Connect the sling gear at the lowest point of
the hook. Never load the hook nose (
ure 11).
Ensure that the hook aperture safety catch is
closed.
Doc.-No.: VA057988-10-OM-EN-0821-62-1
Fig-