Attach The Hoist - J. D. NEUHAUS PROFI 6 TI Customer's Operating And Assembly Instructions

I
NITIAL OPERATION

5.3. Attach the hoist

DANGER
Danger from faulty installation
A faulty installation may result in serious acci-
dents.
Your product PROFI 6 TI may only be installed
by qualified personnel.
WARNING
Danger from chain fracture
Vibrations damage the chain and can lead to
chain breakage.
The supporting structure must form a rigid
support.
Furthermore, no external vibrations may be
transferred to your product (e.g. from the attached
load).
WARNING
Danger from inadequately sized sup-
porting structure
When loads are taken up suddenly on slack chain,
especially at high lifting speeds, impact forces
result that can be several times the load weight.
The attachment points and supporting struc-
ture for your product PROFI 6 TI must be able
to securely absorb the forces (
expected.
Ensure that your product can be freely aligned
under load, as otherwise impermissible additional
loads may occur.
Page 30 of 62
table 1) to be
Load case Shock-
force-
factor
Nominal load 1,3
(6,3t)
25% overload 1,3
(7,9 t)
Table 1: Force to support construction
Figure 10: Securely attach the hoist
Provide a suitable working platform.
Hang the product on a carriage with the sup-
port hook or hang it up stationary.
Ensure that the hook aperture safety catch
closes automatically.
Doc.-No.: VA057988-10-OM-EN-0821-62-1
Force to support
construction
80,4 kN
100,5 kN