SYSTEM DESIGN
A typical LCD based display system utilising this controller is likely to comprise the following:
Summary:
1. LCD panel
2. LCD controller card, AC-1024
3. LCD panel signal cables
4. Connector for LCD signal cables
5. Inverter for backlight (if not built into LCD)
6. Inverter power cable
7. Inverter to backlight cable (if inverter is not part of LCD or if existing panel cable
8. Function controls
9. Function controls cable
10. External type VGA cable
•
•
•
•
Digital View provides a range of parts, such as listed above, to make up complete display
solutions.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
LCD Panel
LCD
connector
Inverter power
LCD
cable
signal
cable
Analog VGA/SVGA
signal in
is too short)
Video connection – optional add-on board
Audio control – optional add-on board
Power supply (not shown)
Enclosure or Mounting (not shown).
Inverter
Optional
audio
adaptor
LCD controller
12V DC power in
Optional video in
5
Backlight
cable
Function
controls