Digital View SP-1600 Instruction Manual
  1. Manuals
  2. Brands
  3. Digital View Manuals
  4. Controller
  5. SP-1600
  6. Instruction manual

Digital View SP-1600 Instruction Manual

Pc, dvi & video interface controller for tft panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PC, DVI & VIDEO INTERFACE CONTROLLER
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
3. System design – Diagram of a suggested system
4. Assembly notes – Important information about system elements
6. Connection & Operation – How to use the controller
10. Connectors, pinouts & jumpers – Essential connection information
19. Controller dimensions
20. Application notes
22. Troubleshooting
23. Specifications
24. Appendix I – Supported modes table
26. Appendix II – RS-232 control protocols
31. Appendix III – Mapping definition
33. Appendix IV – Auto Color Gain
34. Specification for inverter Interface Board P/N 416040010-3
37. Warranty, Caution & Limitation of Liability, Trademarks
38. Contact details
It is essential that these instructions are read and understood before connecting or
powering up this controller.
© Digital View Ltd 2011
FOR TFT PANEL
Model: SP-1600
Part number : 416990030/4X-3
INSTRUCTIONS
www.digitalview.com
Page 1 of 38

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP-1600 and is the answer not in the manual?

Questions and answers

Related Manuals for Digital View SP-1600

Summary of Contents for Digital View SP-1600

  • Page 1 34. Specification for inverter Interface Board P/N 416040010-3 37. Warranty, Caution & Limitation of Liability, Trademarks 38. Contact details It is essential that these instructions are read and understood before connecting or powering up this controller. © Digital View Ltd 2011 www.digitalview.com Page 1 of 38...
  • Page 2 Introduction Design for LCD monitor and other flat panel display applications, the SP-1600 controller provides easy to use interface controller for : TFT (active matrix) LCD panels of 1600x1200, 1366x768, 1280x1024, 1280x800, 1280x768, 1024x768, 800x600, 800x480 and 640x480 resolutions. Computer video signals of VGA, SVGA, XGA, SXGA, WXGA, UXGA standard.
  • Page 3 17. Analog VGA 2 input 18. 12V/24V DC power input 19. External panel power input Digital View provides a range of parts, such as listed above, to make up complete display solutions. © Digital View Ltd 2011 www.digitalview.com Page 3 of 38...
  • Page 4 Power Safety: Note that although only 12VDC / 24VDC is required as ‘power-in’ a backlight inverter for panel backlighting produces significantly higher voltages (the inverter does not connect to the ground plane). We strongly advise appropriate insulation for all circuitry. © Digital View Ltd 2011 www.digitalview.com Page 4 of 38...
  • Page 5 • Refer to graphics modes table in specifications section for supported modes. • Non-interlaced & interlaced video input is acceptable. IMPORTANT: Please read the Application Notes section for more information. © Digital View Ltd 2011 www.digitalview.com Page 5 of 38...
  • Page 6 Once the system has been connected and switched on there are a number of functions available to adjust the display image as summarized in the following sections. The settings chosen will be saved for each mode independently. © Digital View Ltd 2011 www.digitalview.com...
  • Page 7 12V / 24VDC power input : Digital 10K Type OSD switch mount uses P/N 416100520-3 or up 12VDC power input : Digital 10K Type OSD switch mount uses P/N 416100510-3 Digital type © Digital View Ltd 2011 www.digitalview.com Page 7 of 38...
  • Page 8 Blue : Hot Key 4 Hot key 1 : Brightness / Contrast / Input / Aspect / Volume Hot key 2 : Brightness / Contrast / Input / Aspect / Volume © Digital View Ltd 2011 www.digitalview.com Page 8 of 38...
  • Page 9 Reset to Factory Defaults 4 Factory Defaults Reset Color Gain DDC Updates ** : FUNCTION IN VIDEO MODE ONLY # : DISPLAY AND FUNCTION IN VGA MODE ONLY Firmware : V0.15.00 or up © Digital View Ltd 2011 www.digitalview.com Page 9 of 38...
  • Page 10 Molex 43045-0400 compatible (Mating type : Molex 43025-0400 or compatible) Power input Molex 43650-0200 compatible (Mating type : Molex 43645-0200 compatible) (Matching power cable : P/N 426013800-3) Panel selection 8-way DIP Switch Function selection 4-way DIP Switch © Digital View Ltd 2011 www.digitalview.com Page 10 of 38...
  • Page 11 Open = component Cb input is not terminated Close = component Cb input is terminated with 75Ω Panel & function selection See table below Panel & function selection See table below © Digital View Ltd 2011 www.digitalview.com Page 11 of 38...
  • Page 12 ** Ensure that the backlight inverter supports 24V operation prior to connecting a 24VDC input. Because CNA1 pin 1 and CNB1 pin 2 will output 24VDC if input 24VDC via PP2/PP3 or PP5. © Digital View Ltd 2011 www.digitalview.com Page 12 of 38...
  • Page 13 * Maximum current for 3.3V, 5V = 7A, Maximum current for 12V = 5A, Maximum current for 18V = 3.5A JA3, JA5 & JA6 location on board : (Please pay attention to the jumper settings on JA3, JA5 & JA6 which are red in color) JA6 & JA5 © Digital View Ltd 2011 www.digitalview.com Page 13 of 38...
  • Page 14 (1) - Support on firmware V0.12.00 or up revision. (2) - Support on firmware V0.15.00 or up revision. (3) – Support on firmware V0.20.00 or up revision. For additional and recent added panels, see SP-1600 panel support table at http://www.digitalview.com/controllers/csg.php Pos #5...
  • Page 15 +12V / +18V panel supply (selected by JA3, JA5 & JA6) CN4 – Panel connector: HIROSE DF20G-10DP-1V (Matching type : DF20A-10DS-1C) SYMBOL DESCRIPTION Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved No connection No connection © Digital View Ltd 2011 www.digitalview.com Page 15 of 38...
  • Page 16 CNV2 – Component Video in input, JST B6B-PH-K (Matching type : PHR-6) DESCRIPTION Luma in /Green in Ground Cb in / Blue in Ground Cr in / Red in Ground © Digital View Ltd 2011 www.digitalview.com Page 16 of 38...
  • Page 17 Panel power supply (+12V / +18V) VDD +12V/18 Panel power supply (+12V / +18V) LED1 – Status LED connector: 3-pin header DESCRIPTION Green LED pin (anode) LED pin common (cathode) Red LED pin (anode) © Digital View Ltd 2011 www.digitalview.com Page 17 of 38...
  • Page 18 PP4 - External panel power input - Molex 43045-0400 compatible (Mating type : Molex 43025-0400 or compatible) DESCRIPTION External panel power output Ground External panel power output Ground PP5 - Molex 43650-0200 compatible (Mating type : Molex 43645-0200 or compatible) DESCRIPTION +12V / +24V DC Ground © Digital View Ltd 2011 www.digitalview.com Page 18 of 38...

  • Page 19: Controller Dimensions

    Any of the holes shown above can be used for mounting the PCB, they are 3.2mm in diameter. CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high voltage parts such as the inverter. © Digital View Ltd 2011 www.digitalview.com Page 19 of 38...

  • Page 20: Application Notes

    VR WIP VR A This can then be matched with function controls connected to CNC1 pins 4 & 3 or 5: see table. CNC1 DESCRIPTION VR A VR WIP VR B © Digital View Ltd 2011 www.digitalview.com Page 20 of 38...
  • Page 21 To evaluate, plug in different values of Rbc : BVR_WIP 2.5 K 1.2 V 2.4 V 7.5 K 3.6 V 10 K 4.8 V So this circuit could provide Brightness adjust voltage ranging from 0V to 5V. © Digital View Ltd 2011 www.digitalview.com Page 21 of 38...

  • Page 22: Troubleshooting

    If unit after unit keeps failing consider and investigate whether you are short circuiting the equipment or doing something else seriously wrong. Generally after common sense issues have been resolved we recommend step by step substitution of known working parts to isolate the problem. © Digital View Ltd 2011 www.digitalview.com Page 22 of 38...

  • Page 23: Specifications

    For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full technical specifications for the panel from the manufacturer. • Re-layout and custom development services are available. © Digital View Ltd 2011 www.digitalview.com Page 23 of 38...

  • Page 24: Appendix I – Supported Modes Table

    72.188 Composite Sync 72Hz SV_75 800x600 49.500 46.875 75.000 Digital Separate Sync 75Hz SV_75 800x600 49.500 46.875 75.000 Sync On Green 75Hz SV_75 800x600 49.500 46.875 75.000 Composite Sync 75Hz © Digital View Ltd 2011 www.digitalview.com Page 24 of 38...
  • Page 25 The controller has been designed to take a very wide range of input signals however to optimize the PC’s graphics performance we recommend choosing 60Hz vertical refresh rate. To support on higher refresh rate over 60Hz, the LCD panel may not support. © Digital View Ltd 2011 www.digitalview.com Page 25 of 38...

  • Page 26: Appendix Ii – Rs-232 Control Protocols

    The OSD function can be controlled through sending the RS-232 protocol. The RS-232 program can be custom-made to fit for application or it can be used the program provided by DigitalView on request. Please contact your local sales for information. © Digital View Ltd 2011 www.digitalview.com Page 26 of 38...
  • Page 27 Image expansion on/off. “0” | “1” | “2” | “3” “0” – 1:1 “r” | “R” | value “1” – fill screen (Default) “?” Reset “2” – fill aspect Query © Digital View Ltd 2011 www.digitalview.com Page 27 of 38...
  • Page 28 “2” – brightness. “r” | “R” | Reset “3” – contrast (Default) “?” Query “5” – input source “C” - Aspect Set runtime 0xa1, Set runtime counter value = Runtime = nnnnn. © Digital View Ltd 2011 www.digitalview.com Page 28 of 38...
  • Page 29 * Apply for inverter control voltage in range of 0~5V. Backlight On/Off 0xe1, Backlight Off / Backlight On “0” – Backlight Off “0” | “1” | /Status “1” – Backlight On. © Digital View Ltd 2011 www.digitalview.com Page 29 of 38...
  • Page 30 0x4C 0x6C 0x4D 0x6D 0x4E 0x6E 0x4F 0x6F 0x50 0x70 0x51 0x71 0x52 0x72 0x53 0x73 0x54 0x74 0x55 0x75 0x56 0x76 0x57 0x77 0x58 0x78 0x59 0x79 0x5A 0x7A © Digital View Ltd 2011 www.digitalview.com Page 30 of 38...

  • Page 31: Appendix Iii – Mapping Definition

    Appendix III – Mapping definition • Definition of Mapping A : © Digital View Ltd 2011 www.digitalview.com Page 31 of 38...
  • Page 32 • Definition of Mapping B : © Digital View Ltd 2011 www.digitalview.com Page 32 of 38...

  • Page 33: Appendix Iv – Auto Color Gain

    Reset Color Gain function can be used. This function will reset the stored RGB values to a set of approximate values. © Digital View Ltd 2011 www.digitalview.com Page 33 of 38...
  • Page 34 CNB1 : JST 5 ways, B5B-XH-A CNB3 : JST 8 ways, B8B-XH-A PP1 : PWR 4 way PP2 : Terminal Block 2 poles x 2 PP3 : PWR 2 ways © Digital View Ltd 2011 www.digitalview.com Page 34 of 38...
  • Page 35 BVR_A Backlight brightness VR pin A CNB2 – Inverter interface to backlight inverter, JST B4B-XH-A SYMBOL DESCRIPTION VLCD12 Panel power AUX_GND Ground AUX_GND Ground AUX Vcc +5V DC, 500mA max © Digital View Ltd 2011 www.digitalview.com Page 35 of 38...
  • Page 36 SYMBOL DESCRIPTION VLCD12 Panel power VLCD12 Panel power Ground Ground VLCD12 Panel power BLCTRL Backlight on/off control signal BVR_WIP Backlight brightness VR pin WIP BVR_A Backlight brightness VR pin A © Digital View Ltd 2011 www.digitalview.com Page 36 of 38...
  • Page 37 The manufacturer’s liability for damages to customer or others resulting from the use of any product supplied hereunder shall in no event exceed the purchase price of said product. TRADEMARKS The following are trademarks of Digital View Ltd: • Digital View •...

  • Page 38: Contact Details

    Sales: hksales@digitalview.com WEBSITE www.digitalview.com Brand names belong to their respective owners. Specifications subject to change without notice. 15 th issue: 21 June, 2011 (SP-1600 manual.doc) © Digital View Ltd 2006-2011 © Digital View Ltd 2011 www.digitalview.com Page 38 of 38...
  • Page 39 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Digital View 426003300-3...

This manual is also suitable for:

416990030/4x-3

Table of Contents