Page 2
Introduction Designed for LCD monitor and other flat panel display applications, the SP-1920-DUAL-HDMI is a feature rich interface controller for : TFT (active matrix) LCD panels of up to 1920x1200 resolutions. Support true 10 bits panel. Computer video signals of VGA, SVGA, XGA, SXGA, WXGA, UXGA, WUXGA standard.
Appendix V – Media Failover Function SP-1920-DUAL-HDMI has a capability to play media file via USB that this feature called 'Media failover' option. It means when the video input source is no signal / loss of sync on a designated input, the built-in media player display the video content stored in the USB memory stick on the display automatically.
Use of the light sensor board P/N 416021310-3 and light sensor cable P/N 426305900-3 connect to the DT-1920-HDMI via CN6 connector as shown below : Digital View provides a user-friendly software program (TCP-IP Serial Utility V1.10 or later revision) can set thresholds for ambient light and the LCD panel backlight adjustment.
Need help?
Do you have a question about the SP-1920-DUAL-HDMI and is the answer not in the manual?
Questions and answers