Controller Dimensions - Digital View AC-1024 Instructions Manual

CONTROLLER DIMENSIONS

The maximum thickness of the controller is 23mm with or without video add-on board
(measured from bottom of PCB to top of components, including any underside
components & leads). We recommend clearances of:
•
•
•
Any of the holes shown above can be used for mounting the PCB, they are 3.2mm in
diameter.
CAUTION: Ensure adequate insulation is provided for all areas of the PCB with
special attention to high voltage parts such as the inverter.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
5mm from bottom of PCB - if mounting on a metal plate we also
recommend a layer of suitable insulation material is added to the
mounting plate surface.
10mm above the components
3~5mm around the edges
19