1. Manuals
  2. Brands
  3. Digital View Manuals
  4. Controller
  5. HE-1400v2
  6. Instructions manual

Digital View HE-1400v2 Instructions Manual

Pc, dvi interface controller for tft panel
Hide thumbs Also See for HE-1400v2:
Table of Contents

Advertisement

Quick Links

Download this manual
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
3. System design – Diagram of a suggested system
4. Assembly notes – Important information about system elements
6. Connection & Operation – How to use the controller
10. Connectors, pinouts & jumpers – Essential connection information
18. Controller dimensions
19. Application notes
21. Troubleshooting
22. Specifications
23. Appendix I – Graphic Mode Support Table
25. Appendix II – RS-232 control protocols
30. Appendix III – Mapping definition
32. Appendix IV – Color Auto Adjust
33. Warranty, Caution & Limitation of Liability, Trademarks
34. Contact details
35. Revision history
It is essential that these instructions are read and understood before connecting or
powering up this controller.
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 2.00: 15 November, 2017
PC, DVI INTERFACE CONTROLLER
FOR TFT PANEL
Model: HE-1400v2
Part number : 41758012X-3 or up
INSTRUCTIONS
1 of 35
Page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HE-1400v2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Digital View HE-1400v2

Summary of Contents for Digital View HE-1400v2

  • Page 1 35. Revision history It is essential that these instructions are read and understood before connecting or powering up this controller. Specifications subject to change without notice 1 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 2 Introduction HE-1400v2 is the harsh Environment version of the ALR-1400v2. Provides full ALR-1400v2 feature set, plus wide range operating temperature and voltage range; shock and vibration tolerance and conformal coating for extreme environment applications. TFT (active matrix) LCDs with LVDS interface of 1440x900, 1366x768, 1280x1024, 1280x800, 1024x768, 800x600, 640x480 resolution;...

  • Page 3: System Design

    11. Power input (12VDC / 24VDC) 12. RS-232 control port 13. LCD controller card, HE-1400v2 Digital View offers a range of accessories such as listed above, to make up complete display solution. Specifications subject to change without notice 3 of 35 ©...

  • Page 4: Assembly Notes

    Heat & Ventilation: Heat generated from other sources, for example the backlight of a very high brightness panel • may generate significant heat which could adversely affect the controller. Specifications subject to change without notice 4 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 5 • Non-interlaced & interlaced video input is acceptable. • IMPORTANT: Please read the Application Notes section for more information. Specifications subject to change without notice 5 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 6: Connection And Operation

    Once the system has been connected and switched on there are a number of functions available to adjust the display image as summarized in the following sections. The settings chosen will be saved for each mode independently. Specifications subject to change without notice 6 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 7 P/N 416100520-3 or up 12VDC power input : Digital 10K Type OSD switch mount uses Digital type P/N 416100510-3 Specifications subject to change without notice 7 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 8 Set the OSD menu transparency level : 0 / 25 / 50 / 75 / 100 Press – or + (- + ) Total : 5 steps Specifications subject to change without notice 8 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 9 * Function in VGA mode only Items marked 4 have sub menus. Exit the OSD menu to save the setting chosen Specifications subject to change without notice 9 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 10: Connectors, Pinouts & Jumpers

    DVI-D connector Main Input Power Molex 43650-0200 compatible (Mating type : Molex 43645-0200 compatible) (Matching power cable : P/N 426013800-3) Specifications subject to change without notice 10 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 11 1-3 & 2-4 12VDC 5V closed 1-3 & 2-4 OPEN 5-7 & 6-8 CAUTION: Incorrect setting can damage panel & controller Specifications subject to change without notice 11 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 12 JA3 & JA6 location on board : (Please pay attention to the jumper settings on JA3 & JA6 which are red in color on board) Specifications subject to change without notice 12 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 13 1024x768. The preferred EDID resolution should be 1024x768. It should also have the capability to set the max resolution to 1680x1050. Specifications subject to change without notice 13 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 14 Odd data bit G3 Odd data bit G4 Odd data bit G5 Odd data bit G6 Odd data bit G7 Ground Specifications subject to change without notice 14 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 15 The VR for brightness depends on the backlight driver. The main power load for On/Off is handled by a relay on the controller. Specifications subject to change without notice 15 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 16 Negative differential LVDS data bit B1 LVDS_OUT1_B0+ Positive differential LVDS data bit B0 LVDS_OUT1_B0- Negative differential LVDS data bit B0 Ground Specifications subject to change without notice 16 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 17 PP2 - Power supply Molex 43650-0200 compatible (Mating type : Molex 43645-0200 compatible) DESCRIPTION +12VDC 5A max / +24VDC 5A max Ground Specifications subject to change without notice 17 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 18: Controller Dimensions

    CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high voltage parts such as the backlight driver. Specifications subject to change without notice 18 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 19: Application Notes

    This can then be matched with function controls (OSD switch mount) pins 3 & 4: see cable design below . Specifications subject to change without notice 19 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 20 3.6 V 10 K 4.8 V So this circuit could provide Brightness adjust voltage ranging from 0V to 5V. Specifications subject to change without notice 20 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 21: Troubleshooting

    Generally after common sense issues have been resolved we recommend step by step substitution of known working parts to isolate the problem. Specifications subject to change without notice 21 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 22: Specifications

    For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full technical • specifications for the panel from the manufacturer. Relayout and custom development services are available. • Specifications subject to change without notice 22 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 23: Appendix I - Mode Support Table

    1366x768 60Hz Digital Separate Sync 1366x768 60Hz Sync On Green 1440x900 60Hz Digital Separate Sync 1440x900 60Hz Sync On Green Specifications subject to change without notice 23 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 24 60Hz vertical refresh rate. To support on higher refresh rate over 60Hz, the LCD panel may not support. Specifications subject to change without notice 24 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 25: Appendix Ii - Rs-232 Control Protocols

    Set img_vpos = Image vertical position. nn | “+” | “-” | value/increment/decrement (In VGA mode only) “?” Query Specifications subject to change without notice 25 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 26 “0x43” – 2.6 Colour 0xb3, Select colour temperature = Main selected. temperature select value “0” – user defined RGB values. Specifications subject to change without notice 26 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 27 “0” | “1”| “2” | “3” Wide Screen Mode “1” – 1360x768 “r” | “R” Reset “2” – 1366x768 “?” Query "3" – 1368x768 Specifications subject to change without notice 27 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 28 “1” – Invert 0” | “1” | Query “0” – Normal “?” # - Function in VGA mode only Specifications subject to change without notice 28 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 29 0x71 0x52 0x72 0x53 0x73 0x54 0x74 0x55 0x75 0x56 0x76 0x57 0x77 0x58 0x78 0x59 0x79 0x5A 0x7A Specifications subject to change without notice 29 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 30: Appendix Iii - Mapping Definition

    Appendix III – Mapping definition Definition of Mapping A : • Specifications subject to change without notice 30 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...
  • Page 31 Definition of Mapping B : • Specifications subject to change without notice 31 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 32: Appendix Iv - Color Auto Adjust

    Gain function can be used. This function will reset the stored RGB values to a set of approximate values. Specifications subject to change without notice 32 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 33: Warranty

    TRADEMARKS The following are trademarks of Digital View Ltd: Digital View • HE-1400v2 • Specifications subject to change without notice 33 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

  • Page 34: Contact Details

    CONTACT DETAILS Digital View has offices in Asia, Europe and USA also an internet site: Digital View Inc. 18440 Technology Drive Building 130 Morgan Hill, California, 95037 Tel: (1) 408-782 7773 Fax: (1) 408-782 7883 Sales: ussales@digitalview.com EUROPE Digital View Ltd.

  • Page 35: Revision History

    Revision History Date Rev No. Page Summary 15 Nov 2017 2.00 First Issue version. Specifications subject to change without notice 35 of 35 © Digital View Ltd – Doc Ver 2.00: 15 November, 2017 Page...

Table of Contents