Extended Menu - Digital View AC-1024 Instructions Manual

RGB Adjustment – sub menu
Red
Green
Blue
Reset to default
Back to main menu
System Info – sub menu
Display type
Model
BIOS version
Run time
Back to main menu

Extended menu

Dos text or graphics
Direct access 1
Direct access 2
Signal level
Exclusive or priority
OSD vertical position
OSD horizontal position
Menu time out
Menu auto save
Language 4
Back to main menu
Note 2:
Direct access 1 & 2 – sub menu
Volume
Brightness
Contrast
Tuning
PC or Video
Video input
Back to previous menu
The direct access table 1 and 2 allow the user to define the hot-keys functions. There
are two sets of hot-keys can be defined. SEL UP/SEL DN keys can be defined in the
direct access table 1. The +/- keys can be defined in the direct access table 2.
The hot-key function can be turned on by any one push of SEL UP/SEL DN or +/- then
setting can be started.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Adjust the red color level, range: 0 to 79
Adjust the green color level, range: 0 to 79
Adjust the blue color level, range: 0 to 79
Reset the RGB color level to default
Go back to main menu (press + or -)
TFT LCD 1024x768 (or other display modes, e.g. 640x480)
Shows the model number of the board, e.g. AC-1024
Shows BIOS version
Shows the accumulated running time of the board since last reset
Go back to main menu
Set text mode or graphic mode in DOS mode
Turn on direct access table 1
Turn on direct access table 2
Set input signal level (0.7V or 1.0V)
Exclusive: disable "PC or Video" option; Priority: keep "PC or Video"
option .
Move OSD menu vertically
Move OSD menu horizontally
Set menu time-out period
Yes/No
Select language display for OSD menu (note 2)
Go back to main menu
The AC-1024 board with part number 4106891-06 or earlier version does
not support language option (this option with no function or will not
display).
Define hot keys as volume increase/decrease
Define hot keys as brightness level increase/decrease
Define hot keys as contrast level increase/decrease
Define hot keys as tuning adjustment
Define hot keys as PC or Video select
Define hot keys as video signal select (S-video or composite)
Go back to previous menu
11