Digital View SVX-1920v2 Instructions Manual

Digital View SVX-1920v2 Instructions Manual

Pc, dvi, hdmi, video interface controller for tft panel

Advertisement

Quick Links

PC, DVI, HDMI, VIDEO INTERFACE CONTROLLER
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
3. System design – Diagram of a suggested system
4. Assembly notes – Important information about system elements
6. Connection & Operation – How to use the controller
10. Connectors, pinouts & jumpers – Essential connection information
21. Controller dimensions
22. Application notes
24. Troubleshooting
25. Specifications
26. Appendix I – Supported graphics modes table
28. Appendix II – RS-232 control protocols
32. Appendix III – Mapping definition
36. Appendix IV – DV remote control unit work for SVX-1920v2
37. Appendix V – Function description for de-interlacing mode MADI, DCDi
37. Appendix VI – PIP mix table
38. Appendix VII - Network connection
39. Warranty, Caution & Limitation of Liability, Trademarks
40. Contact details
41. Revision history
It is essential that these instructions are read and understood before connecting or
powering up this controller.
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc)
FOR TFT PANEL
Model: SVX-1920v2
Part number : 41744022X-3 or up
INSTRUCTIONS
1 of 41
Page

Advertisement

Table of Contents
loading

Summary of Contents for Digital View SVX-1920v2

  • Page 1 28. Appendix II – RS-232 control protocols 32. Appendix III – Mapping definition 36. Appendix IV – DV remote control unit work for SVX-1920v2 37. Appendix V – Function description for de-interlacing mode MADI, DCDi 37. Appendix VI – PIP mix table 38.
  • Page 2 Introduction Designed for LCD monitor and other flat panel display applications, the SVX-1920v2 is a feature rich interface controller for : TFT (active matrix) LCD panels of 1920x1200, 1920x1080, 1920x480, 1680x1050, 1600x1200, 1600x900, 1440x900, 1366x768, 1280x1024, 1280x800, 1280x768 1024x768, 1024x600, 800x600, 800x480 and 640x480 resolutions.
  • Page 3: System Design

    22. Control over network connection 23. +12V / +24V DC power input 24. External panel power input Digital View provides a range of parts, such as listed above, to make up complete display solutions. Specifications subject to change without notice 3 of 41 ©...
  • Page 4: Assembly Notes

    22. Control over network connection : This is a network device that allow to control RS-232 enable devices over a TCP/IP based Ethernet and the Internet using a web browser. Please refer to Appendix VII in details. Specifications subject to change without notice 4 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 5 • Non-interlaced & interlaced video input is acceptable. IMPORTANT: Please read the Application Notes section for more information. Specifications subject to change without notice 5 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 6: Connection And Operation

    Once the system has been connected and switched on there are a number of functions available to adjust the display image as summarized in the following sections. The settings chosen will be saved for each mode independently. Specifications subject to change without notice 6 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 7 12V / 24VDC power input : Digital 10K Type OSD switch mount uses P/N 416100520-3 or up Digital type Specifications subject to change without notice 7 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 8 Main DCDi 4 On / Off Main MADI mode 4 Normal / Adaptive / Off [See Appendix V for DCDi, MADI function description] Specifications subject to change without notice 8 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 9 Setup : Smart ISP Language : English Factory Reset : Yes / No Specifications subject to change without notice 9 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 10: Connectors, Pinouts & Jumpers

    External panel power input Molex 43045-0400 compatible (Matching connector type : Molex 43025-0400 compatible) (Matching power cable : P/N 426013700-3) Specifications subject to change without notice 10 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 11 Config Menu button (for Ethernet Tact switch button function) Panel selection 8-way DIP Switch Function selection 6-way DIP Switch Specifications subject to change without notice 11 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 12 1-3 & 2-4 OPEN 1-3 & 2-4 5-7 & 6-8 CAUTION: Incorrect setting can damage panel & controller Specifications subject to change without notice 12 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 13 Because CNA1 pin 1 and CNB1 pin 2 will output 24VDC if input 24VDC via PP2 or PP5. Specifications subject to change without notice 13 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 14 JA3, JA5 & JA6 location on board : (Please pay attention to the jumper settings on JA3, JA5 & JA6 which are red in color) JA6 & JA5 Specifications subject to change without notice 14 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 15 (other resolution lock the output be 60Hz. ) OFF – Enable : Always fix the output be 60Hz. Specifications subject to change without notice 15 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 16 VESA and JEIDA. Output LVDS display mode selection OFF : 8 bit ON : 10 bit Reserved Specifications subject to change without notice 16 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 17 BLCTRL On/Off control (enable) – see JB2 & JB3 BVR_WIP Brightness VR – WIP BVR_A Brightness VR A Specifications subject to change without notice 17 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 18 Negative differential LVDS data bit A0 Ground TXB4+ Positive differential LVDS data bit B4 TXB4- Negative differential LVDS data bit B4 Specifications subject to change without notice 18 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 19 +5V power supply for DDC (optional) Ground (+5, Analog H/V Sync) No connection /RX0 TMDS Data 0- TMDS Data 0+ Digital Ground Specifications subject to change without notice 19 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 20 External panel power Ground External panel power Ground PP5 – 12V/24VDC input power supply DESCRIPTION +12V / +24VDC Ground Specifications subject to change without notice 20 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 21: Controller Dimensions

    CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high voltage parts such as the inverter. Specifications subject to change without notice 21 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 22: Application Notes

    This can then be matched with function controls connected to CNC1 pins 4 & 3 or 5: see table. CNC1 DESCRIPTION VR A VR WIP VR B Specifications subject to change without notice 22 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 23 3.6 V 10 K 4.8 V So this circuit could provide Brightness adjust voltage ranging from 0V to 5V. Specifications subject to change without notice 23 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 24: Troubleshooting

    Generally after common sense issues have been resolved we recommend step by step substitution of known working parts to isolate the problem. Specifications subject to change without notice 24 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 25: Specifications

    For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full technical specifications for the panel from the manufacturer. • Re-layout and custom development services are available. Specifications subject to change without notice 25 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 26: Appendix I - Signal Support Mode Table

    X_70 1024x768 75.000 56.476 70.069 Digital Separate Sync 70Hz X_70 1024x768 75.000 56.476 70.069 Sync On Green 70Hz Specifications subject to change without notice 26 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 27 1080p50 1920x1080 50Hz 62.75 720p60 74.25 1280x720P 60Hz 576p50 26.9568 31.2 720x576P 50Hz 480p60 26.9568 31.4 720x480P 60Hz Specifications subject to change without notice 27 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 28: Appendix Ii - Rs-232 Control Protocols

    The RS-232 program can be custom-made to fit for application or it can be used the serial control program, like Accessport, Telix or Serial Utility program developed by DigitalView. Please contact your local support for information. Specifications subject to change without notice 28 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 29 “0x48,0x31” HDMI Runtime counter 0xa1, runtime counter value = Runtime = nnnnn. nnnnn | nnnnn (* 0.5 hour) Specifications subject to change without notice 29 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 30 = 2-byte ascii-coded hex number, e.g., parameter value of 0x1e is represented by “1”, “e” | “E” (0x31, 0x6e|0x4e). Please refer to the ASCII to Hex convert table below. Specifications subject to change without notice 30 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 31 0x52 0x72 0x53 0x73 0x54 0x74 0x55 0x75 0x56 0x76 0x57 0x77 0x58 0x78 0x59 0x79 0x5A 0x7A Specifications subject to change without notice 31 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 32: Appendix Iii - Mapping Definition

    Appendix III – Mapping definition • Definition of Mapping A : Specifications subject to change without notice 32 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 33 • Definition of Mapping B : Specifications subject to change without notice 33 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 34 • Definition of VESA : Specifications subject to change without notice 34 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 35 • Definition of JEIDA : Specifications subject to change without notice 35 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 36: Appendix Iv - Dv Remote Control Unit Work For Svx-1920V2

    Use to view an on-screen information. When OSD menu displayed, press this button to DISPLAY BUTTON turn it off. Specifications subject to change without notice 36 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 37: Appendix V - Function Description For De-Interlacing Mode Madi, Dcdi

    Appendix VI – PIP mix table INPUT SOURCES Component HDMI HDMI Component 1 Specifications subject to change without notice 37 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 38: Appendix Vii - Network Connection

    Use the IP Locator utility available from the IP-50 web-page. http://www.digitalview.com/media/downloads/IPLocator.zip (Windows only) • Double click on the IP address in the IP Locator window, it will open the SVX-1920v2 browser page in your default browser. Alternatively copy the IP address into your browser address line. •...
  • Page 39: Warranty

    TRADEMARKS The following are trademarks of Digital View Ltd: • Digital View • SVX-1920v2 Specifications subject to change without notice 39 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 40: Contact Details

    52 Hung To Road Kwun Tong Hong Kong Tel: (852) 2861 3615 Fax: (852) 2520 2987 Sales: hksales@digitalview.com WEBSITE www.digitalview.com Specifications subject to change without notice 40 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 41: Revision History

    Revision History   Date Rev No. Page Summary 7 July 2014 1.00 First issued   Specifications subject to change without notice 41 of 41 © Digital View Ltd – Doc Ver 1.0: 7 July, 2014 (SVX-1920v2_manual.doc) Page...
  • Page 42 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Digital View 4174400XX-3...

This manual is also suitable for:

41744022x-3

Table of Contents