Specifications; Please Note The Following - Digital View AC-1024 Instructions Manual

SPECIFICATIONS

Panel compatibility
No. of colours
Vertical refresh rate
Dot clock (pixel clock) maximum
Graphics formats
Graphics auto mode detect
Standard input at source
Video inputs (optional video board)
Controls available
Control interface
Settings memory
Run time monitor
PC Connectivity
Controller dimensions
Power consumption
Power load maximum
Voltage output for LCD
Input voltage
Power protection
DC Power handling
Storage temperature limits
Operating temperature limits
NOTES

Please note the following:

•
For specific panel setup a sample of an LCD may be required (this will be
returned) and a copy of the full technical specifications for the panel from the
manufacturer.
•
Relayout and custom development services are available.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Compatible with 1024 x 768 resolution TFT LCD's from
manufacturers such as Sharp, Toshiba, Hosiden,
Hitachi, LG, Samsung, Fujitsu though a specified BIOS
and some factory adjustment may be required for
individual panel timings.
Up to 3 x 8 bit providing 16.7 million colours.
VGA, SVGA, XGA to VESA standards up to 120Hz
160MHz
Standard VGA, SVGA, XGA
VGA, SVGA, XGA
VGA analog (15 pin) standard, composite sync & sync
on green.
•
Composite video: 1.0v (p-p) 75Ω, negative sync
•
S-Video: Y 1.0v (p-p) 75Ω, negative sync, C 0.286v
(p-p) 75Ω
•
On/Off
•
Brightness – inverter
•
OSD Menu
•
OSD Select up
•
OSD Select down
•
Setting +
•
Setting -
•
Buttons
•
Infra red
•
RS-232
Settings are stored in non volatile memory
Updates at 30 minute intervals
VGA / SVGA / XGA analog
179mm x 140mm (7.05" x 5.5")
10w approx. (not including panel power consumption)
The controller has an overall 3Amp current limit.
+3.3V DC, +5V DC, +12V DC
12VDC
Fuse fitted
An on board relay handles the power load for On/Off and
power protection to the LCD.
o o
-40 C to +70 C
o o
0 C to +65 C
23