Connecting A Bluetooth Wireless Technology Accessory (Selected Models Only); Bluetooth Headset - Motorola CLP446 User Manual

CONNECTING A BLUETOOTH WIRELESS
TECHNOLOGY ACCESSORY (SELECTED
MODELS ONLY)
Add Bluetooth Headset (Initial Pairing)
1. Turn the radio OFF.
2. Put Bluetooth headset in pairing mode. Refer to
your Bluetooth headset instructions leaflet.
3. Press and hold the PTT button and power
button simultaneously until radio shows the
blue LED.
LED Configuration
User Mode LED Status
Bluetooth • Last connection
Pairing Mode – Fast blinking
blue
• Add or erase/
add – Solid blue
Pairing Blue/purple blinks for
Successfully 5 seconds
Bluetooth Red/purple blinks
Disconnected until the radio
reconnects
Pairing Fail/ Red/purple blinks
Timeout until radio reconnects
Note:
Reconnect to Last Connected Bluetooth
Headset
1. Turn the radio OFF.
2. Press the power button to turn the radio ON.
(Make sure the Bluetooth headset is
turned ON.)
Erase Bluetooth Headset History and Add

Bluetooth Headset

1. Turn the radio OFF.
2. Put the Bluetooth headset in pairing mode.
Colour
Refer to your Bluetooth headset instructions
leaflet.
3. Press and hold the Menu button and power
button simultaneously until radio shows the
blue LED.
Note:
The Bluetooth feature is disabled when the
wired audio accessory is plugged into the
accessory connector on the CLP radio.
The CLP radio uses proximity pairing. Make
sure the headset is close enough to the
CLP radio. Pairing process takes about
14 seconds.
5
English