Connecting A Bluetooth Wireless Accessory (Select Models Only); Adding Bluetooth Headset; Reconnecting To Last Connected Bluetooth Headset; Erasing Bluetooth Headset History And Add Bluetooth Headset - Motorola CLP1013 User Manual

CONNECTING A BLUETOOTH WIRELESS
ACCESSORY (SELECT MODELS ONLY)
Adding Bluetooth Headset (Initial Pairing)
1. Turn the radio OFF.
2. Put Bluetooth headset in pairing mode. Refer to
your Bluetooth headset instructions leaflet.
3. Press and hold the PTT button and power
button simultaneously until radio shows the blue
LED.
LED Configuration
User Mode LED Status
Bluetooth • Last connection
Pairing Mode – Fast blinking
blue
• Add or erase/
add – Solid blue
Pairing Blue/purple blinks for
Successfully 5 seconds
Bluetooth Red/purple blinks
Disconnected until the radio
reconnects
Pairing Fail/ Red/purple blinks
Timeout until radio reconnects
Note: The Bluetooth feature is disabled when the wired
audio accessory is plugged into the accessory
connector on the CLP radio.
Reconnecting to Last Connected Bluetooth
Headset
1. Turn the radio OFF.
2. Press the power button to turn the radio ON.
(Make sure the Bluetooth headset is turned
ON).
Erasing Bluetooth Headset History and Add
Bluetooth Headset
1. Turn the radio OFF.
Color
2. Put the Bluetooth headset in pairing mode.
Refer to your Bluetooth headset instructions
leaflet.
3. Press and hold the Menu button and power
button simultaneously until radio shows the blue
LED.
Note: (*) The CLP radio uses proximity pairing. Make sure
the headset is close enough to the CLP radio.
Pairing process takes about 14 seconds.
5
English