C560DT and C360DT in-ceiling loudspeakers. It is important to perspective that put all Revel loudspeakers in a class by themselves. read this document before attempting to use this product. Pay Revel in-ceiling loudspeakers provide unparalleled value and are known...
Page 4
loudSpeAkeR plAcement foR diStRibuted 5.1-Channel Speaker Placement Sound • In a 5.1-channel system, the surround left and surround right loudspeakers should be located to the sides of, and approximately • Since distributed sound is general sound throughout an area, place the loudspeakers as uniformly as possible for even sound coverage 10 degrees behind, the main listening area.
+ to –, or – to +) when making connections. Doing so will cause poor imaging and diminished bass response. Revel architectural speakers are the most easily installed in-ceiling loudspeakers on the market. However, if you are unable to understand...
Revel dealer. Detailed mounting instructions are supplied with the rough-in kit. After the drywall is installed, follow the installation instructions in For Existing Construction, below.
Adjustable Angle Tweeter (C780/C760/C580/C560/C380/C360) As you insert the speaker, the RollerLocks will rotate into the locking Most Revel in-ceiling speaker models allow you to adjust the angle of position and will firmly clamp the speaker into the mounting opening. the tweeter. To change the angle, press on the tweeter’s outer ring as shown in the illustration below.
There is no other express warranty on this product. Neither this manufacturing defects so long as: warranty nor any other warranty, express or implied, including implied 1. The Revel products were purchased within the 50 United States, its warranties of merchantability and fitness, shall extend beyond the territories or Canada.
Need help?
Do you have a question about the C780 and is the answer not in the manual?
Questions and answers